IQ-Parts Pipe connector | Four Socket Cross | 25x25 mm | Type 26S

 

With the 4-way cross piece type 26S you get a tube connector with which you can connect maximum 5 square tubes with the same diameter. This connector is intended for connection to a support tube. The support tube in the middle can be pushed completely through the connector, because the connector has an opening in the middle on the otherwise smooth back. The four other connections run in 4 directions from the support tube. The material of the Type 26S tube connector is GALVANIZED CAST IRON.

 

These tube connectors for square cast iron tubes are supplied in galvanised cast iron and in the dimensions 25 x 25 mm diameter.

 

Square tube connectors enable fast, effective and safe implementation of stable tube constructions with high cost-effectiveness.

 

Square tube connector for barriers, exhibition stands, railings and much more.

Are you looking for visually attractive and high-quality tube connectors for square tubes? Then our square tube connectors are exactly what you are looking for. This range offers you countless possibilities when it comes to building scaffolding, balustrades, fences, room dividers, frames, playgrounds, railings, fall protection or protective fences. Integrated Allen screws ensure screw-fastening to the respective square tube.

A firm tightening by hand is sufficient (if you use a torque wrench, set it to 39 Nm).

 

The adjusting screws guarantee a stable external or internal connection. Assembly and disassembly is quick and easy, without special tools. Our square tube connectors are available at short notice and are TÜV-tested.

 

On request, the tube connectors are also available in the size 40x40 mm diameter.

Black painted cast iron is available on request.