IQ-Parts Pipe connector | Handrail support | Type 34

 

The pipe bracket type 34 for attaching railings or other constructions to the wall. This pipe connector and railing bracket is also used for attaching banner/billboard frames to a wall/facade. The pipe holder type 34 is simply slid onto the pipe and tightened by the threaded pin. You can choose from diameters of 26.9 mm (3/4"), 33.7 mm (1/2"), 42.4 mm (1 1/4") and 48.3 mm (1 1/2"). The material of the Type 34 pipe connector is GALVANIZED CAST IRON.

 

The pipe connector is attached to the surface (wall, ceiling or floor) via two drill holes in the bottom.

 

With the pipe connectors for round tubes, you can quickly, effectively and variably create stable pipe constructions with high cost efficiency.

 

Round pipe connector for railings, barriers, exhibition stands and much more

Do you need beautiful, high-quality tube connectors for a round pipe? Our round pipe connectors are suitable for a wide range of constructions, such as scaffolding, balustrades, barriers, room dividers, frames, playgrounds, railings, fall protection, protective barriers and much more. They can be screwed on and are attached to the respective round pipe using an integrated threaded rod.

 

With these round pipe connectors made of galvanised or painted cast iron, pipes in various designs can be mounted. The Allen screws used ensure a stable connection (inside or outside). Simple and quick assembly and disassembly are also guaranteed. Most of our round pipe connectors are available at short notice and are TÜV-approved.

 

You can choose from pipe connectors in 6 different diameters. (21.3 mm, 26.9 mm, 33.7 mm, 42.4 mm, 48.3 mm and 60.3 mm).

Is your desired size not in our shop? Please contact our sales department!