IQ-Parts Pipe connector | Three Way Top Corner 90º | Type 18

 

With the 3-way angle piece type 18 you get a 90° angle connector with which you can connect 3 pipes of the same diameter at a 90° angle to each other. The pipe connection is pushed over the outside of the pipes and thus provides an external pipe connection. The angle pipe connector is available for diameters of 26.9 mm (3/4"), 33.7 mm (1/2"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2"). The material of the pipe connector type 18 is GALVANIZED CAST IRON.

 

With the pipe connectors for round tubes, you can quickly, effectively and variably create stable pipe constructions with high cost efficiency.

 

Round pipe connector for railings, barriers, exhibition stands and much more

Do you need beautiful, high-quality tube connectors for a round pipe? Our round pipe connectors are suitable for a wide range of constructions, such as scaffolding, balustrades, barriers, room dividers, frames, playgrounds, railings, fall protection, protective barriers and much more. They can be screwed on and are attached to the respective round pipe using an integrated threaded rod.

 

With these round pipe connectors made of galvanised or painted cast iron, pipes in various designs can be mounted. The Allen screws used ensure a stable connection (inside or outside). Simple and quick assembly and disassembly are also guaranteed. Most of our round pipe connectors are available at short notice and are TÜV-approved.

 

You can choose from pipe connectors in 6 different diameters. (21.3 mm, 26.9 mm, 33.7 mm, 42.4 mm, 48.3 mm and 60.3 mm).