HYDAC - Twin Clamp | Profiled Design | DIN 3015 Part 3
Brand:
HYDAC
| Article number: | HYD-GR-16-DO |
| SKU: | GR 16 DO |
- 2 year warranty
- Delivery time: 2 Weeks
Information
HYDAC - Twin Clamp | Profiled Design | DIN 3015 Part 3
This pipe clamp consists of a polypropylene clamping part for 2 pipes, hoses and cables, a welding plate and a cover plate which are clamped by means of a bolt.
Clamps to DIN 3015 are a sophisticated modular system for fixing pipes with static and dynamic loads.
It offers several advantages:
- Damping of shocks, vibrations and noise, as well as compensation of pipe tolerances through the use of elastomer inserts
- High strength ensured by ribbed clamp bodies
- Weld plate from a single pulled piece
- Steel parts with sufficient surface protection
- Secure overhead installation through clamping effect of the plastic parts
- Can be installed on C mounting rails, also available with weld struts
- Efficient plug/screw installation of the mounting rail nuts
Assembly
All the pipe clamps in the HY-ROS range offer extremely impressive features: excellent resilience, optimal material resistance to tensile and tear stress, and high abrasion resistance.
The type of pipe clamp, size and material are selected depending on the application and type of stress (thermal / mechanical).
- For secure mounting, stable carrier units, such as base plates and mounting rails, are required according to the load requirements.
- The first clamp should be mounted directly after the threaded connection. This protects the connection from vibrations.
- Bends in the pipe should be clamped on both sides of the bend (pulsation direction must be taken into account).
- The prescribed material property limits must be observed.
- If valves are incorporated in the pipelines, it is recommended that support is provided in front of and behind these valves.
Material properties:
- Clamp: Polypropylene (0,9 g/c m3, -30ºC to 90ºC)
- Metal parts: Steel, bare / galvanised steel
- Screws: Galvanised steel
Thread & Torque rating:
- Size 1: M6 & 5 Nm
- Size 2 to 4: M8 & 12 Nm
- Size 5: M8 & 5 Nm
Optional:
- Elimination of rust penetration due to all-round anti-corrosion coatings
- Gentle component mounting with clamp bodies made of a thermoplastic element
The pipe clamps consist of sizes 1 to 5. You can read the size of your item in the item number. For example HYD-GR-112-DO: the first number is the size, the last numbers indicate the outer diameter of the pipe.
You will also find information about the construction size in the PDF.
Product code:
GR 16 DO - GR 18 DO - GR 110 DO - GR 112 DO - GR 2137 DO - GR 214 DO - GR 215 DO - GR 216 DO - GR 2171 DO - GR 218 DO - GR 320 DO - GR 3213 DO - GR 322 DO - GR 325 DO - GR 4269 DO - GR 428 DO - GR 430 DO - GR 5337 DO - GR 535 DO - GR 538 DO - GR 540 DO - GR 542 DO
Related products
€2,98 Excl. tax
*
Excl. tax
| Excl. Shipping costs
